3
Control panel description
3.1
General description
3.2
What each key means
Fig.1
Control panel
1
2
Bar
3
4
5
6
7
3.3
Meaning of the symbols on the display
Tab.1
Symbols on the display
Information menu: read out various current values.
ECO mode is on.
User menu: settings for user level parameters can be changed.
Manual mode menu: manual mode can be configured.
Installer menu: parameters at installer level can be changed.
Error menu: errors can be read out.
Central heating operation is switched off.
DHW operation is switched off.
Chimney sweep mode is enabled (forced full load or part load for O
Burner output level
Central heating operation is enabled.
DHW operation is enabled.
7698035 - v.01 - 19022018
The HMI Gas 210 ECO PRO control panel is designed for the operation
and control of the Gas 210 ECO PRO boilers.
The control panel can be used to:
Read out the values measured in the heating circuit.
Read out error codes.
Read out and set boiler parameters.
Set a chimney sweep mode.
Important
For operation of the Gas 210 ECO PRO boiler: each module has
its own control panel.
1 Display
2 [Menu] key
3 [Chimney sweep] key
4 [Escape] or [Reset] key
5 [Central heating temperature] or [-] key
6 [DHW temperature] or [+] key
8
7 [Enter] key or [Service] indicator
8 On/off switch
The display has several positions and symbols and provides information
about the operating status of the boiler and any faults. A maintenance
message may also appear on the display. Numbers, dots and/or letters
may be shown. The symbols above the function keys indicate the current
function.
AD-4000041-01
3 Control panel description
/CO
measurement).
2
2
7