5
Operation
5.1
Use of the control panel
Fig.2
Browsing in the menus
2x
7698035 - v.01 - 19022018
The meaning of the symbols in this display are described elsewhere in this
user manual.
If no key is pressed for 3 minutes, the display lighting switches off and the
display only shows the
display: the current boiler status and current operating code will be shown
on the display. If an error has occurred, this is permanently displayed.
5.1.1
Browsing in the menus
1. Press the
The
2. Press the
3. Press the
4. Press the
5. Press the
6. Press the
7. Press the
back to the main display.
AD-4000061-01
and symbols. Press any key to activate the
key to activate the regulator from the stand-by screen.
symbol flashes in the menu bar.
key to move the cursor to the right.
key to move the cursor to the left.
key to confirm the selection of the desired menu.
or
key to change the value.
key to confirm the value.
key once to go to the previous step, or twice to go
5 Operation
9