Focus Operation - JVC JY-HM360AG Instructions Manual

Using the Focus/Zoom Ring
1 Set the [FOCUS/ZOOM] operation switch to
"ZOOM".
You can adjust the preferred angle of view by
turning the focus/zoom ring.
Saving/Recalling Current Zoom
Position (Preset Zoom)
This allows you to register up to three zoom
positions.
1 Assign the "Preset Zoom1", "Preset
Zoom2", or "Preset Zoom3" function to any
of the user buttons.
(A P32 [Assignment of Functions to User
Buttons] )
(A P88 [USER1 to USER7, LCD KEY▲, LCD
KEY▶, LCD KEY▼, LCD KEY◀] )
2 Save the current zoom position.
Press any of the buttons assigned with the
0
"Preset Zoom1", "Preset Zoom2", or "Preset
Zoom3" function for more than 1 second.
The current zoom position will be stored.
0
3 Recall the stored zoom position.
Press any of the buttons assigned with the
0
"Preset Zoom1", "Preset Zoom2", or "Preset
Zoom3" function and release within 1
second.
The camera recorder zooms to the stored
0
zoom position.
Memo :
The speed to zoom to the zoom position can be
0
set in [Main Menu] B [Camera Function] B [User
Switch Set] B [Preset Zoom Speed].
(A P89 [ Preset Zoom Speed ] )
Operating other zoom maneuvers during a
0
zoom position recall will cancel the recall.
42
Zoom Operation

Focus Operation

.
Adjusting Focus Automatically
Set the [FOCUS AUTO / MANU / BAUTO] focus
switch to "AUTO".
There is no icon display in Auto Focus mode.
Memo :
If [Main Menu] B [Camera Function] B [AF
0
Assist] is set to "Area" or "Far/Near", you can turn
the focus/zoom ring to shift the auto focus point
while in the automatic focus adjustment mode.
(A P88 [ AF Assist ] )
When face detection is enabled, the Auto Focus
0
icon e appears with the face mark.
(A P96 [ Focus ] )
One Push Auto Focus
While in the Manual Focus mode, pressing the
[FOCUS AUTO / MANU / BAUTO] focus switch to
"BAUTO" (within 1 minute) makes the camera
recorder focus on the center of the frame
automatically.
Memo :
Face detection does not work during One Push
0
Auto Focus.
AF Assist does not function.
0
When the operation is complete, the camera
0
recorder returns to the Manual Focus mode
automatically.
One Push Auto Focus functions with emphasis
0
on the focusing speed. This function is not
suitable during recording.
FOCUS
FOCUS ASSIST/1
AUTO
TIME CODE
MANU
AUTO
LOCK
FOCUS ZOOM