5.2.10 Display Status Messages - Landis+Gyr E350 Series User Manual

42/56

5.2.10 Display Status Messages

© Landis+Gyr
Index value Item
(OBIS code)
C.7.2 Phase L2 (S) Fail Count (not for 3-wire
ZFFxxx meters)
C.7.3 Phase L3 (T) Fail Count
Signed Instantaneous Reactive Power
130.7.0
QI+QII+QIII+QIV
Instantaneous Reactive Import Power +R
3.7.0
QI+QII
Instantaneous Reactive Export Power –R
4.7.0
QIII+QIV
Instantaneous Apparent Import Power
9.7.0
+VA
Instantaneous Apparent Export Power -
10.7.0
VA
Instantaneous Neutral Current (4-wire
91.7.0
ZMF1xx meters only)
Instantaneous Current ~ Sum of I1, I2, I3
90.7.0
(4-wire ZMF1xx meters only)
81.7.40 Instantaneous U1-I1 angle
Instantaneous U2-I2 angle (4-wire
81.7.51
ZMF1xx meters only)
81.7.62 Instantaneous U3-I3 angle
81.7.10 Instantaneous U1-U2 angle
Instantaneous U1-U3 angle (4-wire
81.7.20
ZMF1xx meters only)
81.7.21 Instantaneous U2-U3 angle
4 Energy efficiency items (see section
5.2.11)
Module data 1 - 12 (value and OBIS
code will be sent by module)
End of list
Depending from configuration the following messages can appear at the
end of a display list:
Message Meaning
FF 00000000 Error detected (if error value FF > 0)
rEd Reverse energy detected
td Terminal cover removal detected
mFd Strong magnet field tamper detected
btd Supply control switch (breaker) tamper detected
D000027979 en t – E350 Series 2, 3-Phase ZxF100Ax/Cx – User Manual
Operation
Meter firmware
version
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M29...]
[M23...]