Landis+Gyr E350 Series User Manual page 3

Revision History
s 05.07.2016
t 23.08.2106
Although the information contained within this document are presented in good faith and believed to be correct, Landis+Gyr (including
its affiliates, agents and employees) disclaim any and all liability for any errors, inaccuracies or incompleteness relating to the product.
Landis+Gyr makes no warranty, representation or guarantee regarding the performance, quality, durability or suitability of the products
for any particular purpose. To the fullest extent permitted by law Landis+Gyr disclaims (1) any and all liability arising out of the use of
the product, (2) any and all liability, including, but without limitation to, special, consequential and indirect damages and losses, and (3)
any and all implied warranties, including, but without limitation to, fitness for purpose and merchantability.
The information contained in this document is strictly confidential and is intended for the addressee only. The unauthorised use,
disclosure, copying, alteration or distribution of this document or the contents thereof is strictly prohibited and may be unlawful.
All product information are subject to change without notice.
D000027979 en t – E350 Series 2, 3-Phase ZxF100Ax/Cx – User Manual
Moved section 1 "Safety" to the beginning of the document.
Updates section 2.7 "Instantaneous Values".
Updated section 5.2.9 "Meter Display List – Available Items with OBIS Codes".
Moved sections 5.5.3 "Readout Status Code (C.5.0)" and 5.5.4 "Display Status
Code (C.5.0)" to the Functional Description.
Updated terminology (e.g. software changed to firmware; disconnector changed to
supply control switch).
Updated section 2.6.3 "Signal Processing".
3/56
© Landis+Gyr