Mechanical Description
3
Mechanical Description
3.1
Housing
D000027979 en t – E350 Series 2, 3-Phase ZxF100Ax/Cx – User Manual
The internal construction of the meter will not be described here, as the
meter is sealed after calibration and verification.
1
5
10
13
Fig. 3.1 Front view of meter
1
Front cover (faceplate with laser marking, for details see Fig. 3.2)
2
Suspension hanger (not inserted for covered mounting)
3
LCD
4
Display button
5
Screw with sealing point (manufacturer or verification seal)
6
Optical interface
7
Pulse output LED active energy (red)
8
Pulse output LED reactive energy (red)
9
Communication module compartment
10
Screw with sealing point (manufacturer or utility seal)
11
Terminal cover
12
Supply control switch button
13
Screw with sealing point (utility seal)
A terminal block with all connecting terminals is located under the terminal
cover. On the terminal cover, two sealing points for utility seals prevent
unauthorised access to the phase connections and therefore help to avoid
unrecorded power consumption.
2
3
4
5
6
7
8
9
10
11
12
13
© Landis+Gyr
21/56