Displaying Obis Codes - Landis+Gyr E350 Series User Manual

Operation
5.2.3

Displaying OBIS Codes

Representation
example
D000027979 en t – E350 Series 2, 3-Phase ZxF100Ax/Cx – User Manual
For OBIS (Object Identification System), the structure A-B:C.D.E.F applies.
The individual groups have the following significance:
A Defines the medium, e.g. electricity, gas, heat or water-related data.
Group A is represented with the media icons.
B Group B is not shown on E350 meters (only channel 1 available). From
firmware version M26 upwards, group B can be displayed using a
formatted command, if necessary, for external M-Bus multi-energy
devices connected to module. The first digit of the four-digit OBIS code
displays the channel used by the M-Bus device, e.g. a device with the
four-digit OBIS code "4.1.8.0" uses channel "4".
C Defines the measured quantity, the abstract or physical data items
related to the information source concerned, e.g. active power, reactive
power, apparent power, power factor, current or voltage.
D Defines types, or the result of the processing of physical quantities
according to various algorithms. The algorithms can deliver energy and
demand quantities as well as other physical quantities.
E Defines the rates in use. For abstract data or for measurement results
without rates, this value group can be used for further classification.
F Group F is not shown on E350 meters.
OBIS identification code 1-1:2.8.3.0 (Active energy export, Rate 3) is
represented as follows on the display:
+Q
-P
Group A of the OBIS identification code is represented by the media icon
for electricity, groups B and F are not displayed and groups C to E are
represented as index value 2.8.3.
Active energy export for rate 3 is indicated by 252.4 kWh.
The active energy direction arrow -P, the phase voltage indications L1, L2
and L3 and the arrow symbol of the current rate are also displayed.
L k h
L L
1 2 3
33/56
© Landis+Gyr