Mechanical Installation: Checklist - Siemens SINAMICS S120 Equipment Manual

3.2

Mechanical installation: Checklist

Important safety precautions
To ensure that the SINAMICS S120 Cabinet Modules operate safely and reliably, they must
be properly installed and commissioned by qualified personnel, taking into account all the
warning notices provided.
In particular, the general and national installation and safety guidelines for high-voltage
installations (e.g. VDE – the Union of German Technical Engineers) as well as the
guidelines relating to the proper use of tools and personal protective equipment must be
observed.
Death, serious injury, or substantial material damage can result if these guidelines are not
observed.
Checklist
Use the following checklist to guide you through the mechanical installation procedure for the
cabinet/transport unit. Read the chapter titled "Safety information" before you start working
on the cabinet.
For installation instructions, see the "Mechanical installation" section or refer to the
documents listed in the table below.
Note
Check the boxes accordingly in the right-hand column if the activity applies to the cabinet
unit in your scope of delivery. In the same way, check the boxes once you have finished the
installation procedure to confirm that the activities are complete.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
DANGER
Mechanical installation
3.2 Mechanical installation: Checklist
35