L42/L43/L44, Line Connection Module For Active Line Modules/Basic Line Modules/Smart Line Modules - Siemens SINAMICS S120 Equipment Manual

Options

8.22 L42/L43/L44, Line Connection Module for Active Line Modules/Basic Line Modules/Smart Line Modules

8.22 L42/L43/L44, Line Connection Module for Active Line Modules/Basic
Line Modules/Smart Line Modules
Availability of options
These options are available for the following S120 Cabinet Modules:
● Line Connection Module
Option L42, Line Connection Module for Active Line Module
This option means that the Line Connection Module is adjusted for connection to an Active
Line Module.
If a main contactor (option L13) is required for correct functioning in the Line Connection
Module, this contactor is automatically included.
Option L43, Line Connection Module for Basic Line Module
This option means that the Line Connection Module is adjusted for connection to a Basic
Line Module.
In this case, the Line Connection Modules are equipped with the line reactor for Basic Line
Modules. If the line reactor is not required, it can be deselected with option L22 (line reactor
not included in scope of supply).
Option L44, Line Connection Module for Smart Line Module
This option means that the Line Connection Module is adjusted for connection to a Smart
Line Module.
If a main contactor (option L13) is required for correct functioning in the Line Connection
Module, this contactor is automatically included.
396
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A