Siemens SINAMICS S120 Equipment Manual page 86

Electrical installation
4.5 Connections
Cable routing to the customer terminal block -X55
1. Feed the cable for the customer terminal block into the cabinet from the bottom left.
2. Use cable ties to secure the cable at suitable points.
3. Guide the cable further up into the cabinet and, when it reaches customer terminal block
4. Use cable ties to secure the cable at suitable points.
5. Connect the cables to the customer terminal block -X55.
86
Frame size:
GX HX
-X55, guide it to the left or right to -X55. When doing so, route the cable in a similar
manner to the standard cables that have already been installed in the cabinet.
JX
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A