Connection For Side-By-Side Installation Of Cabinet Units - Siemens SINAMICS S120 Equipment Manual

Mechanical installation
3.3 Mechanical installation
3.3.6

Connection for side-by-side installation of cabinet units

Description
An accessories kit is provided with each cabinet or transport unit for the connection of
cabinet units in a side-by-side installation. The table below shows the content of this
accessories kit and the fixing points for connecting the cabinet units.
Table 3- 2
Quantity
4 x
3 x
Preparatory steps
● Disconnect the cabinet units from the power supply.
● Allow unimpeded access to the profiles in the cabinet interior (if necessary, remove the
Assembling
1. Attach the row clamps/row connectors to the appropriate profiles (as shown in the figures
2. Insert and tighten the screws and washers.
3. If necessary, reattach the protective covers and doors.
NOTICE
For each row of cabinets installed, one side panel must be installed on the right (option
M26) and one side panel on the left (option M27).
42
Content of the accessories kit and recommended fixing points
Connectors
Row clamps
(incl. fixing accessories)
Row connectors
(incl. fixing accessories)
side panels, doors, and protective covers).
above).
Fixing points
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A