D14, Preliminary Copy Of Customer Documentation - Siemens SINAMICS S120 Equipment Manual

Options

8.2 D14, Preliminary copy of customer documentation

Note
The Cabinet Modules come in a range of different frame sizes, with each size differing from
the others in several ways. The main differences are:
• The covers used can have different dimensions, and they can be arranged and secured
• The components can be arranged differently within the cabinet units.
• The components can be mounted within the cabinet units using different methods.
These variations result from the different requirements made of the components/equipment
installed in the cabinet units. These differences are intentional and exist for "EMC
optimization" reasons.
8.2 D14, Preliminary copy of customer documentation
If documents such as circuit diagrams, terminal diagrams, arrangement diagrams and
dimension drawings are required for the system engineering (integration of the plant in
higher-level systems, interface clarification, installation, building planning, etc.), advance
documentation can be ordered when ordering the cabinet modules. These documents are
then supplied electronically a few working days after the order has been entered. If the order
includes options that fall outside the scope of standard delivery, these will not be covered by
the documentation due to the obvious time constraints.
Documentation relating to the order is sent to the buyer by e-mail. The recipient's e-mail
address must be specified with the order for this purpose. In the e-mail, the recipient is also
provided with a link for downloading general advance documentation such as operating
instructions, manual and commissioning instructions.
324
in different ways.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A