Siemens SINAMICS S120 Equipment Manual page 191

Order no.
Weight, approx. (standard version)
Frame size
Rated output of a typ. 6-pole standard induction motor based on I
1)
Rated output of a typ. 6-pole standard induction motor based on I
2)
The base load current I
3)
The base load current I
4)
For the interdependency of pulse frequency and max. output current/output frequency, see SINAMICS Low-Voltage
5)
Engineering Manual on the enclosed CD-ROM.
The specified power loss equals the maximum value at 100 % capacity utilization. The value in normal operation is
6)
lower.
Total of all motor cables. Longer cable lengths for specific configurations are available on request, see SINAMICS -
7)
Low-Voltage Engineering Manual on the enclosed CD-ROM.
With option L10 (dv/dt filter plus VPL):
8)
- Frame size FX/GX/HX/JX →Supplementary cabinet 600 mm wide
With option L34 (circuit breaker at output side):
- Frame size FX/GX →supplementary cabinet 400 mm wide
- Frame size HX/JX →supplementary cabinet 600 mm wide.
The cabinet height increases by 250 mm with IP21 degree of protection, and by 400 mm with IP23, IP43 and IP54
9)
degrees of protection.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
6SL3720-
kg
is based on a duty cycle of 110% for 60 s or 150% for 10 s with a duty cycle duration of 300 s.
L
is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s.
H
5.6 Motor Modules in chassis format
1TE37- 1TE38- 1TE41-
5AA0 4AA0 0AA0
490 490 700
HX HX JX
or I at 400 V 3 AC 50 Hz.
N H
or I at 460 V 3 AC 60 Hz.
N H
Cabinet Modules
1TE41- 1TE41-
2AA0 4AA0
700 700
JX JX
191