Interfaces - Siemens SINAMICS S120 Equipment Manual

8.7 K48, SMC20 Sensor Module Cabinet-Mounted for sin/cos incremental encoder or EnDat absolute encoder
CAUTION
Connecting cables to sensors must always be installed with shielding. The cable shield
must be connected to the ground potential at both ends over a large surface area.
Connecting cables that are routed together with the motor cable must be twisted in pairs
and shielded separately.
8.7.3

Interfaces

Figure 8-9
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
Interface overview for the SMC20
Options
339