NEW BRUNSWICK SCIENTIFIC BioFlo 415 Manual To Operations page 41

SCREEN NAME
and ICON
Your
BioFlo 415
comes with
pre-assigned
loop names.
As you add
more, use the
SCROLL DOWN
buttons to see
them.
SCREEN ACCESS
buttons
Parameter Column
LoopName
PV
Setpoint
Out%
Control Mode
Unit (of measure)
Cascade
New Brunswick Scientific
Figure 11: Sample SUMMARY Screen
NOTE: The dark blue button usually
represents the screen being displayed. Here it
shows a new screen, SYNOPTIC, accessible
from this screen (see Section 6.2.4 for details.
Table 2 identifies the other interactive features of the
Table 2: SUMMARY Screen Features
Each unit comes with standard factory-assigned loops (e.g.,
Agitation, Temperature, pH, DO, etc.). There are also
unassigned loops available, to be named and set up by the
user when adding external equipment, for a maximum total
of 32 loops.
Process Variable: here the display reflects the current value
for each loop, in comparison to its setpoint (displayed in the
next column).
The current setpoint (default or user-set) for each loop.
The current percent output for each loop. This is an
automatic control function to maintain current readings
within the setpoint tolerance range.
Depending on the loop, the control mode may be Off, Auto,
Manual, On, or O2 Enrich.
This is the unit of measure used for the PV and Setpoint.
If any cascades have been programmed, they will be
displayed here.
PHASE INDICATOR
Description
...continued...
OPERATING
MODE
VESSEL LIGHT
button: press
once to turn
light on for 10
minutes; press
again to turn off
SCROLL UP
buttons
SCROLL
DOWN
buttons
Current
DATE &TIME
SUMMARY screen:
User's Guide
29