NEW BRUNSWICK SCIENTIFIC BioFlo 415 Manual To Operations page 21

The unit is shipped
with the gas inlets
plugged. Be sure to
remove each metal
plug before you
insert tubing.
IF ANY GAS INLET
WILL NOT BE USED,
KEEP IT CLOSED OFF
with the metal plug
provided.
CAUTION!
Before making electrical connections, verify that the supply voltage
matches the voltage and the power requirements marked on the
electrical specification plate (located on the rear panel of the cabinet)
and the control schematics supplied with the unit.
New Brunswick Scientific
Figure 1a: Control Cabinet Service Connections
9
User's Guide