NEW BRUNSWICK SCIENTIFIC BioFlo 415 Manual To Operations page 107

To add new hardware, after connecting the module to the system:
1. Press the Scan Hardware
appear in the
2. Press the >>>
3. Your BioFlo 415 needs a unique ID number: in the SCADA pane, assign the
correct Communication Mode and Unit ID number, then press the
Step 1:
press here
New Brunswick Scientific
Figure 58: Hardware Setup Screen
button in this screen. All new hardware scanned will
New Hardware box (see Figure 59 below).
button and the new hardware list will move into the Module box.
Figure 59: Adding New Hardware
95
Set button.
Step 2:
press here
User's Guide