And Controls - DENTSPLY Cavitron Touch Directions For Use Manual

8 2 diagnostic display indicators and Control
Service
1 - Cable or handpiece issue.
2 - Unit overheating. Stop use and
contact Cavitron Care.
Icon will appear when water filter
needs to be replaced. Once replaced,
press and hold to reset indicator.
Purge mode is used to flush water
lines. Runs automatically for 2
minutes.
This screen shows when purge
is activated.
• Scale Icon -
press to return to
main screen
• Depress foot pedal
to return to main
screen
• Main screen will
appear when
countdown is
complete
Rinse mode is for use during an
ultrasonic scaling procedure when
lavage is desired with no cavitation.
This screen shows when rinse
is activated. Depress foot pedal
to begin rinse mode cycle.
• Scale Icon -
press to return to
main screen
Press & hold until settings
screen appears (see pg.9).
Main Screen
8
Foot Pedal Battery
Indicates battery life of foot pedal.
Preset Power Modes-
Programmable
Press and hold until sound
indicator is heard.
Lock / Unlock Icons
Press and hold to lock or
unlock screen. Screen appears
dimmed when locked.
Power Level Icon
Adjust number to desired power
level by swiping in an upward or
downward motion.
• Power levels set
between 05 and
35 are within Blue
Zone range