Figure 70 Upgrading The Firmware 1; Figure 71 Upgrading The Firmware 2; Figure 72 Upgrading The Firmware 3 - idp SOLID Series User Manual

"Upgrade firmware" enables to
upgrade firmware of network
module.

You can choose a firmware file.

Warning box will be shown during
firmware upgrade for network module.

It is recommended not to do other work
during firmware upgrade for system
reliability.

Please do not turn off a printer until the
upgrade is completed.

When firmware upgrade is completed,
pop-up comes out for reboot. Please
click "Yes".

It takes 1 minute to reboot.
 Please click "Refresh" after reboot.
When proper printer shown, please
connect printer by clicking "Connect".

Figure 70 Upgrading the firmware 1

Figure 71 Upgrading the firmware 2

Figure 72 Upgrading the firmware 3

48