Automatic Mode
Place the package in the measurement area and it is measured automatically. If a
scale is attached it will be weighed as well, as shown in the example below:
Measurement with a Bar Code Scanner
When a bar code scanner is connected via USB to your computer, the Scan Data
field will display in the measurement panel. No other software should have an
active bar code scanner connection while you are using the AutoCube app.
You have two options for capturing scan data:
•
•
Note: Glare from the bar code scanner may affect the image but will not affect the
dimensioning.
AutoCube 8200 User Guide
Scan a bar code to initiate the AutoCube measurement process.
Or
Click Measure then scan the bar code.
21