Section 2: Installation; Hazardous Locations; Environmental Specifications; Adjusting The Optional Solar - Emerson FB2100 Instruction Manual

Section 2: Installation

This section covers the following topics:
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
The flow computer ships from the factory fully assembled, except for the optional solar panel
assembly.
2.1

Hazardous Locations

The housing for the FB2100 is an explosion-proof case designed to operate in hazardous locations.
For North America the FB2100 has certifications for Class I Division 2 (Groups A, B, C & D) non-
incendive, and non-hazardous locations only.
Division 2 installations.
For other world areas the FB2100 has ATEX and IEC Ex certifications for Ex nA Zone 2 non-sparking
installations and non-hazardous locations only. See
All certifications are listed on the data plate located on the top of the device.
2.2

Environmental Specifications

This section summarizes the environmental specifications for the device. For full details, refer to
the product data sheet
Installation
Hazardous Locations
Environmental Specifications
Required Tools
Site Considerations
General Wiring Guidelines
Grounding
Opening/Closing the Enclosure
Mounting the Enclosure
Power Modes
Connecting Power
Installing the Optional 30W Solar Panel
Adjusting the Optional Solar Panel
Connecting Communications Ports
Door Contact Terminal
FB2100 Flow Computer
Emerson FB2100 Flow Computer Instruction Manual
Appendix A contains special information for Class I
Appendix B for more information.
(D301791X012).
D301783X012
March 2019
11