Emerson FB2100 Instruction Manual page 80

Flow computer

Hide thumbs Also See for FB2100:

Table of Contents

Emerson FB2100 Flow Computer Instruction Manual

D301783X012

March 2019

Hold to Wake button (the left-most button) typically for five to ten seconds. You can also pre-

define a number of automatic wake up times during the day from the Power Control screen in

FBxConnect. Exercise care because the more frequent (or more lengthy) the wakeup time, the

greater the power usage and the greater the reduction in battery life.

To temporarily keep the HMI module out of sleep mode, maintain an active FBxConnect

connection. As long as communications remain active, the HMI module does not sleep

Figure 4-1. Waking up the Display

Go to the front of the flow computer and touch your finger on the glass above the Hold to

Wake button until the display lights up. (This may take several seconds.)

If prompted, login using a valid username/password combination. For information on how

the buttons work, see

Table

The display enters Screen Saver Mode where it sequentially presents a series of screens

showing details about meter run flow rates, totals, and current process variables.

4-1.

Operation

Table of Contents