Our full-time professional instructors can conduct classroom training at several of our corporate offices, at your site, or even at your regional Emerson office. You can also receive the same quality training via our live, interactive Emerson Virtual Classroom and save on travel costs. For our complete schedule and further information, contact the Remote Automation Solutions Training Department at 800-338-8158 or email us at education@emerson.com.
Page 3
(0.5 to 0.7 N-m), and 10 to 12 in-lbs (1.1 to 1.4 N-m). Important Use only accessories (batteries) supplied with the flow computer or sold by Emerson as spare parts for this flow computer. Substituting a part you obtain elsewhere (such as a battery) voids your approval certification.
Page 4
FB1100/FB1200 Flow Computer Coin Cell Battery Field Replacement Guide D301854X012 November 2020 Note Use these cell batteries only in devices where the servicing of the cell circuit and replacement of the lithium cells is done by a trained technician. Important If this equipment is used in a manner not specified by the manufacturer, the protection provided by equipment may be impaired.
Page 5
FB1100/FB1200 Flow Computer Coin Cell Battery Field Replacement Guide D301854X012 November 2020 Grasp the end cap. Front End Cap Unscrew the end cap by turning it counter-clockwise until it comes off. Set the end cap aside in a safe location.
Page 6
FB1100/FB1200 Flow Computer Coin Cell Battery Field Replacement Guide D301854X012 November 2020 Removing/Replacing the Coin Cell Battery Insert the new coin cell battery in the slot. The positive side (+) must be on top. CAUTION When inserting the SRAM coin cell battery push the battery gently into its slot until it stops.
Page 7
FB1100/FB1200 Flow Computer Coin Cell Battery Field Replacement Guide D301854X012 November 2020...