Table of Contents
Advertisement
Factory Line - Wireless LAN
Interfaces (continued)
Receiver sensitivity at the R-SMA connection
Frequency range
Modulation method
Roaming
Antennas
Range for 802.11b
Range for 802.11g
Impedance
Polarity
Filter/encryption
Filter
Encryption/authentication
Mechanical tests
Shock test according to DIN EN 60068-2-29
Vibration resistance according to DIN EN 60068-2-6
Conformance with EMC directives
Compliance with the following CE test specifications
Compliance with the "Safety of Information Technology Devices" test
specification
Approvals
Global wireless licenses
Compliance with the "Safety of Information Technology Devices" test
specification
4-2
PHOENIX CONTACT
For 802.11a: -67 dBi at 54 Mbps, -87 dBi at 6 Mbps
For 802.11b: -87 dBi at 11 Mbps, -94 dBi at 1 Mbps
For 802.11g: -70 dBi at 54 Mbps, -87 dBi at 6 Mbps
2.412 to 2.472 GHz (IEEE 802.11b/g)
5.15 to 5.34 GHz/5.47 to 5.725 GHz (IEEE 802.11a/h)
802.11b: DSSS, 802.11a/g/h: OFDM
Support of three roaming methods:
Standard roaming - Fastest possible roaming using limited channel lists,
roaming threshold, and configurable active scanning
Tabular roaming - Configurable fixed order of access points (including
Modbus/TCP API for direct control of the response and SNMP interface)
R-SMA antenna connections, vert./hor. polarity with antenna diversity, fitted
with external removable omnidirectional antennas, 2 x 7 dBi omnidirectional
for 2.4 GHz and 2 x 5 dBi for 5 GHz supplied as standard
Outdoors: 300 m at 11 Mbps, 400 m at 1 Mbps
Buildings: 30 m at 11 Mbps, 50 m at 1 Mbps
Outdoors: 80 m at 54 Mbps, 300 m at 6 Mbps
Buildings: 15 m at 54 Mbps, 35 m at 6 Mbps
50 Ohm
Vertical/horizontal
MAC
IP
Network protocol
TCP ports
UDP ports
Predefined filter wizard for filtering data between WLAN and Ethernet.
Predefined filter records for standard communication requirements and
simple, menu-led creation of new filter records make configuration easy.
None
WEP 64-bit
WEP 128-bit
WEPplus
WPA/PSK 802.11i with TKIP or AES/CCMP
WPA/RADIUS with TKIP or AES/CCMP
802.1x radius authentication (also in "Client" mode)
5g, when there is a half wave of 30 ms
Operation 1g, 10 - 500 Hz
EN 55022
EN 50082-2
DIN EN 60950 (VDE 0805, IEC 950)
ETSI versions (Europe) available
DIN EN 60950 (VDE 0805, IEC 950)
7190_en_02
Advertisement
Table of Contents
