Phoenix Contact FL WLAN 24 AP 802-11 User Manual page 30

FL WLAN 24 AP 802-11
A
B
Mounting
2-8
PHOENIX CONTACT
• Install the mounting plate on a flat mounting surface and use at least two mounting
points that lie opposite each other.
1 2 8 m m ( 5 . 0 3 9 " )
1 1 3 m m ( 4 . 4 4 9 " )
3 3 m m ( 1 . 2 9 9 " )
M 4
B
A - A
Figure 2-5 Drill hole spacing
2.2.6.2 Attaching the device to the mounting plate
• Place the electronics module on the mounting plate.
• Attach the electronics module to the mounting plate using two ISO 4017-M4 x 10-8.8
screws. These screws do not require additional measures to prevent them from
loosening.
A
B - B
4 m m
( 0 . 1 5 7 " )
5 9 9 8 A 2 0 4
7190_en_02