Wireless Lan Access Points/Ethernet Clients; Device Properties - Phoenix Contact FL WLAN 24 AP 802-11 User Manual

2

Wireless LAN access points/Ethernet clients

7190_en_02
2.1

Device properties

Wireless interfaces
The devices have up to two dual band wireless interfaces with 13 channels according to
IEEE 802.11b/g in the 2.4 GHz ISM band and 19 channels according to IEEE 802.11a
(observing IEEE 802.11h standards) in the 5 GHz band.
Security
Encryption
– WEP or WEPplus with 64-bit or 128-bit keys
– WPA TKIP or WPA2 AES with full support of standard IEEE 802.11i
Authentication
– PSK
– IEEE 802.1x (RADIUS) with EAP TLS, EAP TTLS or PEAP (even in "Client" mode)
Filtering
– MAC filtering in the access points
Networking
– Redundancy through the use of Spanning Tree
– VLAN support according to IEEE 802.1q
– DHCP client or fixed IP address
User interface
– Password-protected access to the web interface
– Configurable access via HTTP or HTTPS
Client monitoring
– Client connection monitoring by the access points (messages are sent in the event of
connection loss)
– In the event that the uplink is lost, dual access points can abandon the clients so that
the clients can search for another access point via roaming.
Hardware
– IP65 housing
– Fixed onto a mounting plate
– Replaceable antennas (R-SMA connection on the device)
Compliance with regulating bodies
– Compliance with the legal requirements of the country of use is automatic on selection
of the country in the web interface
– Selectable antennas/transmission power combinations to comply with regulations
– Transmission power can be set manually
Wireless LAN access points/Ethernet clients
2-1
PHOENIX CONTACT