Table of Contents
Advertisement
Factory Line - Wireless LAN
Certificate upload
3-34
PHOENIX CONTACT
3.5.4
"System" menu
3.5.4.1
"WLAN device/System" menu
In the access point, certificates are used to authenticate the communication partner for
RADIUS and HTTPS servers. This web page can be used to manage the certificates for the
access point. A few demo certificates are stored here by default upon delivery.
Figure 3-34
"System/Certificate upload" menu
When a certificate is loaded to the device, a validity check is performed automatically. An
invalid certificate is indicated as "invalid" under "Validity", in addition a question mark is
displayed which can be used to access additional information about the status.
Certificate requirements
–
Certificate format: PKCS#12 (*.p12) or *.PEM
–
The certificate must contain the public and private key
7190_en_02
Advertisement
Table of Contents
