Phoenix Contact FL WLAN 24 AP 802-11 User Manual page 103

7190_en_02
OpModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is used to distinguish the
WIFI operation mode of
an access point (master) or access client
(station)."
SYNTAX INTEGER {
station(0),
master(1)
}
-- interface1 params
plDevWlanIf1ParamState OBJECT-TYPE
SYNTAX EnabledDisabledStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"State of this interface. It may be enabled or
disabled."
::= { plDevWlanIf1Parameter 1 }
plDevWlanIf1ParamOpMode OBJECT-TYPE
SYNTAX OpModeType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Operation mode of this interface. It may either
run as access point (clients can connect to it) or as WLAN
client (connects to an access point)."
::= { plDevWlanIf1Parameter 2 }
plDevWlanIf1ParamSSID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SSID (Service Set Identifier) for this
interface. An SSID can be up to 32 characters long. Only
Technical appendix
5-3
PHOENIX CONTACT