Table of Contents
Advertisement
Factory Line - Wireless LAN
3-18
PHOENIX CONTACT
With binary representation of the IP address the network class is represented by the first
bits. The key factor is the number of "ones" before the first "zero". The assignment of
classes is shown in the following table. The empty cells in the table are not relevant to the
network class and are already used for the network address.
Class A
Class B
Class C
Class D
Class E
The bits for the network class are followed by those for the network address and the user
address. Depending on the network class, a different number of bits are available, both for
the network address (network ID) and the user address (host ID).
Class A
Class B
Class C
Class D
Class E
IP addresses can be represented in decimal or hexadecimal form. In decimal notation,
bytes are separated by dots (dotted decimal notation) to show the logical grouping of the
individual bytes.
The decimal points do not divide the address into a network and user address. Only the
value of the first bits (before the first "zero") specifies the network class and thus the
number of remaining bits in the address.
Bit 1
Bit 2
Bit 3
Bit 4
0
1
0
1
1
0
1
1
1
1
1
1
Network ID
7 bits
14 bits
21 bits
28-bit multicast identifier
27 bits (reserved)
Bit 5
0
1
0
Host ID
24 bits
16 bits
8 bits
7190_en_02
Advertisement
Table of Contents
