Sim Card Reader According To Iso 7816 - Phoenix Contact FL WLAN 24 AP 802-11 User Manual

FL WLAN 24 AP 802-11
2-12
PHOENIX CONTACT
– The device is set up as shown in Figure 2-6 on page 2-9
– All cable feed-throughs/filler plugs are inserted in the cavities
– The wiring space cover has been reattached with all five screws.
2.2.9

SIM card reader according to ISO 7816

The SIM card function is supported in Version 03 and later.
All configuration settings can be stored on the SIM card (not supplied as standard,
FL WLAN SIM, Order No. 2692539).
Pin assignment
Table 2-2 SIM card assignment
Pin
1
2
3
4
5
6
7
8
2.2.9.1 Inserting the card in the reader
X1: 24V/0V X2: L/PE/N
DC 110V/230V AC
Figure 2-10 Position of the SIM card reader
– Open the reader holder.
– Push the card into the holder.
– Close the holder again.
Signal
VCC 5 V
Reset
Clock
n/c
GND
n/c
I/O
n/c
X3:
HOST
719000018
Pin position
1 5
2 6
3 7
4 8
7190_en_02