Profibus Fieldbus Screen; Profinet Fieldbus Screens - Graco Therm-O-Flow 25C994 Instructions Manual

Setup

PROFIBUS Fieldbus Screen

NOTE: These screens are shown only if you have a
PROFIBUS fieldbus CGM installed.
Screen 1
Press the key to access this screen. Use the arrow
keys to navigate to each field and the keypad to set the
device address, install date, location tag, function tag,
and description.
Screen 2
Use the down arrow key on the ADM to navigate to
screen 2. This screen displays the hardware revision,
system serial number, and data map identification infor-
mation.
6

PROFINET Fieldbus Screens

NOTE: These screens are shown only if you have a
PROFINET fieldbus CGM installed.
Screen 1
Press the key to access this screen. Use the arrow
keys to navigate to each field and the keypad to set the
IP address, DHCP settings, subnet mask, gateway, and
DNS information.
Screen 2
Use the down arrow key on the ADM to navigate to
screen 2. Press the
can set the station name, install date, location tag, func-
tion tag, and description.
key to access this screen. You
3A5186B