Table of Contents
Advertisement
Automation Outputs (Signals from the PLC to the Therm-O-Flow)
Instance
Output
Number
Bytes
1
0
2
1
3
2 - 3
4
4 - 5
5
6 - 9
6
10 - 11
7
12 - 15
*
Set this byte to one of the following: 0 = Do Nothing, 1 = Turns ON the System (same as pressing the
System (same as pressing the
** Used to set the temperature setpoints to tenths of a degree (for example, 3005 = 300.5) in the selected units of measurement (°C or °F). See
the Temperature Setpoint Zone Designation Table on page 16.
See System Control Bits on page 14.
†
See the Appendix C - Error/Event Tables on page 22
See Appendix B - Data Exchange Interface on page 17.
3A5186B
Description
System Activate/Stop
Setpoint Zone Designation
Setpoint Temperature for Selected Zone
System Control Bits
Error/Event Number Acknowledged
Data Exchange Interface Pointer Output Designation
Data Exchange Interface Output Value
key).
Available Internal Data
Units
*
**
°C/°F**
†
key), 2-255 = Shuts Down the
11
Advertisement
Table of Contents
