Data Exchange Interface Pointer Designation Tabl - Graco Therm-O-Flow 25C994 Instructions Manual

Appendix B - Data Exchange Interface

Data Exchange Interface Pointer Designation Tabl

Description
0 Interface Not Active
1 Set Temperature Units
2 Read Temperature Units
3 Set Mass Units
4 Read Mass Units
5 Set Specific Gravity
6 Read Specific Gravity
7 Set High Temp. Alarm Offset
8 Get High Temp. Alarm Offset
9 Set High Temp. Deviation Offset
10 Get High Temp. Deviation Offset
11 Set Low Temp. Alarm Offset
12 Get Low Temp. Alarm Offset
13 Set Low Temp. Deviation Offset
14 Get Low Temp. Deviation Offset
15 Set Prime Pump Duration
16 Get Prime Pump Duration
17 Read System Version
18 Read System Date
19 Read System Time
20 Read ADM Version
21 - 90 Reserved for Future Use
18
Value - Setting
0 - °F
1 - °C
Value - Setting (0 - g, 1 - kg, 2 - lb)
Specific gravity in thousandths (for instance a SG setting of
1.055 = 1055).
In whole selected C or F units of measure.
Prime pump duration setting in second increments
A 32-bit string in the format of 0xXXCCBBAA.
0xCC...Build Version
0xBB...Minor Version
0xAA...Major Version
A 32-bit string in the format of 0xXXDDCCBB.
0xDD...Year (0x0D corresponds to 2013)
0xCC...Month (0x0A corresponds to October)
0xBB...Day
A 32-bit string in the format of 0xDDHHMMSS.
0xHH...Hours
0xMM...Minutes
0xSS...Seconds
0xDD...Day of week (0x01 corresponds to Monday)
A 32-bit string in the format of 0xXXMMNNBB
0xMM...Major #
0xNN...Minor #
0xBB...Build #
Comments
Read/
Write
Read
Write
Write
Read
Write
Read
Write
Read
Write
Read
Write
Read
Write
Read
Write
Read
Read
Read
Read
3A5186B