Green Led/ Power Led Connector (Gled/Pwr Led); Hardware Reset Connector (Rst) - Shuttle FS58 Manual

Green LED/ Power LED Connector
B1
This header is dual color LED function. Dual color LED function is defined by
either Power LED or Green LED, the header can be in these states.
The Green LED indicates that the system is currently in one of the power saving
mode (Doze/Standby/Suspend). When the system resumes to normal opera-
tion mode, the Green LED will go off, power LED on.
This Power LED will go off during power saving mode. Attach a 2-pin Green
LED/Power LED cable to (GLED/PWR LED) header.
4 2
GLED
-
+

Hardware Reset Connector (RST)

B1
Attach the 2-pin hardware reset switch cable to the (RST) header.
Pressing the reset switch causes the system to restart.
4 2
PWR LED
-
+
- 32 -
(GLED/PWR LED)
Front Panel (JP8)
RST HLED
1
PWON GLED/PWR LED
Front Panel (JP8)
HLED
RST
1
PWON GLED/PWR LED