Table of Contents
Advertisement
Front-Panel Connectors
F
ATX Power On/Off Switch Connector (PWRSW)
C1
The Power On/ Off Switch is a momentary-type switch used for turning on or off
the system's ATX power supply. Attach the connector cable from the Power
Switch to the 2-pin Power Switch header on the mainboard.
Green LED Connector (GRN LED)
C2
The Green LED (GRN LED) indicates that the system is currently in one of the
power saving mode (Doze//standby/Suspend). When the system resumes to nor-
mal operation mode, the Green LED will go off. Attach a 2-pin Green LED cable
to GRN LED header.
Note:
Please note all the LED connectors
are directional. If your chassis's LED
does not light up during running,
please simply changeto the oppo-
site direction.
HDD LED Connector (HDD LED)
C3
Attach the connector cable from the IDE device LED to the 2-pin HD LED
header. The HDD LED lights up whenever an IDE device is active.
PANEL1
2
1
- 31 -
PANEL1
2
1
PANEL1
2
1
Advertisement
Table of Contents
