Front-Panel Connectors Atx Power On/Off Switch Connector (Pwr Pt); Epmi Connector (Epmi) - Shuttle AK32A User Manual

Front-Panel Connectors
ATX Power On/Off Switch Connector (PWR PT)
C1
The Power On/Off Switch is a momentary- type switch used for turning on or off
the system's ATX power supply. Attach the connector cable from the Power
Switch to the 2-pin PWR PT header on the mainboard.
Note : Note :
Note : Note : Note : Please note the Speaker and all the LED connectors are directional.
If your chassis's LED does not light up during running, please
simply change to the opposite direction.

EPMI Connector (EPMI)

C2
Hardware System Management Interface (EPMI) header may attach to a 2-pin
momentary switch. Press the EPMI switch to force the system into power saving
mode; press again to resume normal operation.
- 33 -
+
P LED SPEAK
JP7
1 RST
HLED GLED EPMI PWR PT
+ - + -
+
P LED SPEAK
JP7
1 RST
HLED GLED EPMI PWR PT
+ - + -