Download Print this page

NEC NP02LM Installation Manual

Wireless lan unit.
Hide thumbs

Advertisement

Wireless LAN Unit
Installation Guide
Model: NP02LM
NEC Display Solutions, Ltd. 2010
1

Advertisement

   Related Manuals for NEC NP02LM

   Summary of Contents for NEC NP02LM

  • Page 1

    Wireless LAN Unit Installation Guide Model: NP02LM NEC Display Solutions, Ltd. 2010...

  • Page 2

    FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 3

    This Class B digital apparatus complies with Canadian RSS-210. Cet appareil numérique de la Classe B est conforme à la norme CNR-210 du Canada. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired...

  • Page 4

    Table of Contents Introduction ..........................5 Connecting to a Wireless LAN ....................6 Technical Specifications......................7...

  • Page 5

    Wireless LAN Unit supports the following NEC projector. NP-M350X NP02LM Series offers performance comparable to an Ethernet Local Area Network (LAN) system, without the limitations of network cables. It allows you to connect your computer to a Local Area Network from anywhere within the wireless coverage area. It also enables you to roam throughout...

  • Page 6

    2. Connecting to a Wireless LAN The Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are required to assign an IP address to the projector. Important: • If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is prohibited, remove the USB Wireless LAN Unit from the projector.

  • Page 7

    Prepare a Phillips screw driver beforehand. 1. Press the POWER button to turn off the projector and set it into standby condition, and disconnect the power cord. 2. Remove the USB (LAN) port cover. Loosen the screw securing the port cover. • The screw is not removable.

  • Page 9

    NETWORK SETTINGS of Wireless LAN Unit...

  • Page 11

    Setting up the Projector for a Wireless LAN Connection (with the Wireless LAN Unit equipped) [WIRLESS LAN] Hints on How to Set Up LAN Connection To set up the projector for a LAN connection:Access the HTTP server function to display the web browser (→...

  • Page 12

    LAN settings when using the Image Express Utility Lite and connecting the PC and projector via a wireless LAN.The Image Express Utility LIte is contained on the supplied NEC Projector CD-ROM. To use [EASY CONNECTION], access the HTTP server function to display the web browser (→...

Comments to this Manuals

Symbols: 0
Latest comments: