Figure 3-26 Connection Of Analog Pb Tel/D Term - NEC NEAX 2400 ICS Manual

3.7.3 Cable Termination and Cross Connection from the DRU-30-A/DRU-30-S3 to the Analog PB TEL/
term
D
START
Cable running
Termination of Cables
Check terminal locations on the
DRU-30-A/DRU-30-S3 side of the
IDF
Cross Connection
END
DRU-30-A/DRU-30-S3
DRE card
CHAMP1
CHAMP0
CHAMP
CONNECTOR
(MALE)
CHAMP Connector Cable (25P)
While referring to Figure 3-26, run cables between each Analog
PB TEL/D
Modular Blocks and the IDF.
Protect the cables using cable ducts, etc.
While referring to Figures 3-27 and 3-28, terminate the installed
cables to the IDF and the Modular Blocks.
While referring to Figure 3-29, identify the lead names for the
CHAMP Connector of DRU-30-A/DRU-30-S3 and the termi-
nal locations of the leads.
While referring to Figures 3-27 and 3-28, provide cross connec-
tions at the Analog PB TEL/D
DRU-30-S3 side.
IDF
Figure 3-26 Connection of Analog PB TEL/D
ND-45383 (E)
term
and its Modular Block (Jack), and between the
MODULAR BLOCK
(JACK)
MODULAR
1-PAIR CABLE
CABLE
term
side and the DRU-30-A/
Analog PB TEL
term
or D
term
CHAPTER 3
Revision CD 1.0
Page 101