Table of Contents
Advertisement
3.8 Cleaning and Visual Inspection
START
Cleaning
Visual Inspection
END
Clean the inside of the DRU.
Clean the area around the DRU, rectifier, and MDF/IDF.
Clean the location for the field office.
Dispose of dust, trash, etc.
Confirm that DLI Mounted in NEAX2400 IMS are partially in-
serted.
Confirm that all connectors are correctly and completely se-
cured.
Confirm that the installation cables are arranged neatly.
Confirm that all fanning, soldering, and cross connections are
complete at the MDF/IDF.
ND-45383 (E)
CHAPTER 3
Page 107
Revision CD 1.0
Advertisement
Table of Contents
