Table 6.11 Recalling A Weld Preset From Memory - Emerson Branson LPX Instruction Manual

NOTICE
Press the ESC key to exit the preset mode without saving the preset.

Table 6.11 Recalling a Weld Preset from Memory

Step
1 Press the Recall Preset key while on the ready screen.
Preset and Recall icons and digits will appear on the LCD.
The digits under the Preset icon shows the Preset number.
Select the preset number using the Up/Down Arrow keys,
then press the Enter key.
2
the displayed preset number while navigating to the desired
preset number.
This will recall the saved preset and return to the ready
3
screen with the selected preset value displayed.
NOTICE
Press the ESC key to exit the preset mode without recalling the preset.
100-412-196 REV. 06
NOTICE
Weld Mode icon will show the Weld Mode associated with
Action Reference
65