Installation Checklist - Emerson Branson LPX Instruction Manual

5.1

Installation Checklist

The LPX Power Supply is shipped with an appropriate power cordset. Additional items
required to operate the power supply in a system are detailed in
Description.
The unit should be positioned away from radiators and heating vents. A fan inside the unit
maintains a safe operating temperature in the power supply by circulating air over the
components. Therefore, place the unit so that the air intake at the back of the power
supply is not blocked. Periodically, unplug the unit and clean the air intake and also the air
exhaust underneath the power supply to ensure that dust or dirt is not restricting the flow
of air.
If the LPX Power Supply is to be used for remote operation, ensure that the unit is situated
within full view of the operator, to prevent injury or equipment damage through an
accidental or automatic start-up.
A Fan Filter Kit (EDP 101-063-934) is available (factory installed only), and is
recommended for use in areas that are high in airborne contamination.
32
5.2 System Component
100-412-196 REV. 06