Emerson Branson LPX Instruction Manual page 68

Table 6.7 Time Mode Operational Sequence
Step
Use the Up/Down Arrow keys and the Left/Right Arrow keys
to select On Time Mode, then press the Enter key to confirm
the selection. You will be directed to the parameters area.
3
Only the weld control modes will be visible.
On Time icon and parameter numbers will flash. Use the Up/
Down Arrow keys and the Left/Right Arrow keys to enter the
desired value, then press the Enter key to confirm the
selected value.
4
Only the parameters associated with the selected mode will
be displayed.
Reference image showing default On Time setting of
0.05 sec.
Amplitude icon will flash. Press the Enter key to change the
parameters.
Amplitude parameter numbers will flash. Use the Up/Down
Arrow keys and the Left/Right Arrow keys to enter the
5
desired value, then press the Enter key to confirm the
selected value.
Reference image showing default Amplitude setting of 50%.
58
NOTICE
NOTICE
NOTICE
NOTICE
Action Reference
100-412-196 REV. 06