Emerson Branson LPX Instruction Manual page 64

Table 6.5 Energy Mode Operational Sequence
Step
Press the Mode/Configuration key once to get into mode
2
selection. Current selected mode icon will blink.
Use the Up/Down Arrow keys and the Left/Right Arrow keys
to select Energy Mode, then press the Enter key to confirm
the selection. You will be directed to the parameters area.
3
Energy icon and parameter numbers will flash. Use the Up/
Down Arrow keys and the Left/Right Arrow keys to enter the
desired value, then press the Enter key to confirm the
selected value.
4
Only the parameters associated with the selected mode will
be displayed.
Reference image showing default Energy setting of 1 Joule.
54
NOTICE
Only the weld control modes will be visible.
NOTICE
NOTICE
Action Reference
100-412-196 REV. 06