Back Panel Connections; Figure 2.3 Back Panel Of Lpx Power Supply; Table 2.3 Connections To The Lpx Power Supply - Emerson Branson LPX Instruction Manual

2.3

Back Panel Connections

Figure 2.3 Back Panel of LPX Power Supply

1
2
3
4
Table 2.3 Connections to the LPX Power Supply
Item
1
2
3
4
5
6
22
Name
Power Switch
IEC/C14 Power
Connector
Fuse Holder
User I/O J2 Connector
Ground Detect Terminal
(Optional)
3 pin RF Connector
Function
Turns the unit on/off.
To connect the power supply to a grounded
electrical power source using the provided
detachable line cord.
Provides access to a replaceable protective fuse.
Connects the power supply to a PLC controller
for remote control.
Factory installed option used to detect contact
between the horn and an anvil which has been
isolated from ground.
Connects the power supply to the ultrasonic
converter.
5
6
100-412-196 REV. 06