Operating Instruction; Operating The Pm160(T); Local Operation - THORLABS PM160T User Manual

PM160(T)

4 Operating Instruction

·
The PM160(T) can be operated as a stand-alone device or remotely, via
USB or wireless (Bluetooth). Please note that the internal battery is charged
only when the device is connected to USB.
·
Prior to connect the PM160(T) to a PC, the application software must be in-
stalled; if a wireless operation is desired, a Bluetooth connection must be es-
tablished on the host system. Please see section
tails.

4.1 Operating the PM160(T)

The PM160(T) can be operated as a stand-alone device or remotely, via USB or
wireless (Bluetooth).
Note
In any operating mode, the internal battery can be charged by connecting the
PM160(T) to a PC or to USB charger using the attached USB cable.

4.1.1 Local Operation

Push the "ON/OFF" button (8) to switch on the PM160(T). A start-up screen is
displayed for a moment
then the standard measurement display comes up, indicating the measured op-
tical power and wavelength:
Additionally, in the header the connection type (USB or Bluetooth) and the battery
status are shown.
10
Software Installation
© 2018 Thorlabs
for de-