THORLABS PM160T User Manual page 25

Troubleshooting
If the app or the connection hangs up, a restart might be required. Follow this pro-
cedure:
1. Disconnect the Bluetooth connection as described in the previous section.
2. Click the Home button once to set the active App to background.
3. Click the Home button twice, like a double click. The list of active Apps ap-
pears at the bottom.
4. Press and hold the PM160(T)App icon for about 3 seconds until a Minus
symbol appears at the top left corner of the App's icon:
5. Click the Minus symbol. The App is stopped.
6. Click the Home button twice to leave.
7. Connect the PM160(T) with the iPad as described above to reestablish the
setup.
© 2018 Thorlabs
4 Operating Instruction
23