Usb Remote Operation (Windows® Os) - THORLABS PM160T User Manual

4.1.2.2 USB Remote Operation (Windows® OS)
1. Make sure the PM160(T) Application Software is installed (see section
ware Installation)
2. Set the PM160(T)
3. Connect the PM160(T) to the PC using the supplied USB cable.
4. The operating system recognizes the USB device:
5. Start the PM160(T) application software
6. The GUI opens and automatically connects to the PM160(T).
7. If automatic connection fails, open the Device Menu and select "Open
Device...":
If no instruments are displayed, click to "Refresh", then select the desired in-
strument and click "Connect":
© 2018 Thorlabs
interface to USB.
4 Operating Instruction
Soft-
19