4.7 Configuring the Program Options
Note:
The programming instructions in this section are only required if you will
be using any of the options listed below.
From the APP side menu, click the Program Options sub-menu under the
PROGRAM
menu, as highlighted in Figure 84 below. This will open the Program
Options
menu shown in Figure 85 on page 78.
The Program Options menu includes the following tabs:
•
ENERGY
•
INPUTS
(see page 81)
•
OUTPUTS
•
USER FUNCTIONS
Proceed to the appropriate section for programming instructions.
®
TransPort
PT900 User's Manual
(see page 79)
(see page 82)
(see page 87)
Figure 84: The PROGRAM Menu
Chapter 4. Programming
77