Disposing Of The Batteries; Powering On And Off - GE TransPort PT900 User Manual

Portable ultrasonic flow meter for liquids
Hide thumbs Also See for TransPort PT900:
Table of Contents

Advertisement

2.7.3 Disposing of the Batteries

CAUTION!
not attempt to disassemble or short-circuit the batteries. For
safety, do not handle a damaged or leaking battery.
CAUTION!
some areas, battery disposal in business or household trash may
be prohibited. For safe disposal options, contact your nearest GE
authorized service center.

2.8 Powering On and Off

To operate the PT900, the power cord must be plugged into line voltage or the
battery pack must be charged as described in the previous sections.
CAUTION!
battery-powered device, and it is not to be operated with the AC
power adapter connected. To comply with CE certification,
unplug the AC power adapter before operating the PT900.
WARNING!
send the unit back to the factory for a battery replacement.
Make sure you keep the battery charged until you are ready to
ship the unit back to the factory. Before shipping, print out all of
the log and site data, or transfer it to your PC. Never dispose of
the battery by incineration. Do not attempt to disassemble or
short-circuit the battery pack. For safety, do not handle a
damaged or leaking battery.
®
TransPort
PT900 User's Manual
Never dispose of the batteries by incineration. Do
Be sure to dispose of your batteries properly. In
For CE compliance, the PT900 is classified as a
If the PT900 fails the backup battery test, you must
Chapter 2. Installation
41

Advertisement

Table of Contents
loading

Table of Contents