Connecting The Connecting Cable; Supply Voltage; Cable Entry - Endress+Hauser Proline Prosonic Flow 91W Technical Information

Connecting the connecting
cable

Supply voltage

Cable entry

8
Connection sensor cable in the electronics compartment
a b
a, b Sensor connection cable
c Cable gland holder
d Cable gland
Transmitter
85 to 260 V AC, 45 to 65 Hz
20 to 55 V AC, 45 to 65 Hz
16 to 62 V DC
Sensor
Powered by the transmitter
Power supply and signal cables (inputs/outputs)
• Cable entry M20 × 1.5 (8 to 12 mm; 0.31 to 0.47 in)
• Cable gland for cables, 6 to 12 mm ( 0.24" to 0.47")
• Thread for cable entries ½" NPT, G ½"
Connection cable (sensor /transmitter)
Cable glands for one multicore connection cable (1 ×
• Cable gland M20 × 1.5
• Thread for cable entries ½" NPT, G ½"
Connection cable (sensor /transmitter)
Cable glands for two single core connection cable (2 ×
• Cable gland M20 × 1.5
• Thread for cable entries ½" NPT, G ½"
The Prosonic Flow W DN 15 to 65 (½ to 2½") is grounded via the cable gland.
Cable gland for one multicore connection cable (1 ×
d

8 mm) per cable entry

4 mm) per cable entry

8 mm /0.31 in) per cable entry
Proline Prosonic Flow 91W
c
A0015907
a0016008
Endress+Hauser